Level Gauges

Product Details:

The principle lies in the reflection of the outer light. In the steam or gas phase the light is reflected by the prismatic grooves of the glass therefore gives a clear appearance. In the liquid phase the light is absorbed thus providing a dark indication of the level.

• Process connection orientation : Side/side, top/bottom with back/back
• Process connection type : Flanged, Threaded Unions, Butt Weld Ends
• Vent / drain connection : Needle, Valve - Gate, Globe or Ball type or Plug or Flange
• Gauge cocks : Auto- shut-off ball check, off-set pattern, Bolted or Screwed Bonnet

Additional Information:

• Item Code: Rlg201

Product Details:

Tubular level gauge is a most economic instrument where direct level measuring is required at low pressure. It conists of a C channel frame or tie rods with process connection, glass tube & valves. Glass tube is fixed between two valves which directly indicates level of the process fluid. The level of liquid inside the glass tube is same as the liquid level in the tank. Scale mounted on C-Frame indicates

• Rugged construction
• Easy mounting
• Low maintenance
• Direct visible level indication
• Economical measurement solution
• No power requirement, for level indication

Product Details:

Magnetic level gauge is a most reliable instrument where direct level measuring is required. It can be used with level transmitter.

• Rugged construction.
• Easy mounting with flanged connection
• Low maintenance
• Continuous level monitoring (with use of transmitter 4-20mA output)
• Direct visible level indication
• No process fluid in contact with the level indicator
• Economical measurement solution
• Suitable for Interface level application
• Safe for high temperature, high pressure applications
• Safe for corrosive,flammable, toxic liquids
• Available in different range of materials
• Assured level indication without power supply

Additional Information:

• Item Code: MLG201

Product Details:

Magnetic float level gauge involve the use of a permanent magnet sealed inside a float whose rise and fall causes the opening or closing of a mechanical switch, either through direct contact or in proximity of a reed switch. With mechanically actuated floats, the float is directly connected to a micro switch.For magnetic level gauge, chemical compatibility, temperature, specific gravity (density),operating pressure affect the selection of the stem and the float. Besides Magnetc we also provide the following types of level gauges

Tubular Level Gauge:

This type level Gauge is used for observation at the liquid level application at medium and low pressure. Tubular Level Gauges are designed to view liquid levels using clear or red line Borosilicate tubing. All valves use a stuffing box configuration to seal the glass tube and have a ball check shutoff to prevent loss of vessel contents in case of glass failure.

 

Transparent Level Gauge:

These are assembled with two numbers of totally transparent toughened glasses to give a thorough vision of liquid levels. These gauges are recommended for interface levels, colored fluids where color is of interest to the process behavior and services where excessive foaming may exist. In high-pressure boilers, these gauges are recommended to be used with mica shields.

 

Reflex Level Gauge:

These are assembled with flat glasses with inner surfaces of reflecting prisms. Due to total internal reflection liquid level shows black in contrast to a mirror-like surface above. The gauges are used for services where observation is required at a distance and on boilers/vessels.

Additional Information:

• Item Code: MLGSeries