Humidity Sensors And Transmitters

Product Details:

SC804 is a high-performance 2-wire Relative Humidity & Temperature (RH+T) Transmitter for use in hazardous environments. With its integral relative humidity and temperature sensor, the transmitter is inside a surface-mounted flameproof (certified for gas groups I, IIA, IIB and IIC) enclosure with an IP66 rating; completely dust proof and can withstand temporary flooding. Remote external sensors, SHT20, SHT30 (wall-mount) and SHT40 (duct-mount) may be placed as far as 25 meters from the unit. SC804 has a dual LED display visible through the flameproof enclosure; the upper indicates relative humidity and the lower indicates temperature. This transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature.

Additional Information:

• Item Code: SC804flp

Product Details:

Relative Humidity and Temperature Transmitter SC807 is a high-performance 2-wire Relative Humidity & Temperature (RH+T) Transmitter.

· Its relative humidity and temperature transmitter is available in duct mount, surface mount and remote sensor versions. Remote external sensors, SHT20, SHT30 (wall-mount) and SHT40 (duct-mount) may be placed as far as 25 meters from the unit.

· This transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature.

· SC807 transmits two isolated output signals to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR).

· Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. SC807’s micro controller technology linearizes the input which makes control more effective.

· It is powered by a 4.5 - 32 V DC loop supply and has a loop drop of no more than 4.5V, which is remarkably low amongst such products.

· The RH+T transmitter is user programmable by a PC, connected via PCC82, a PC configurator by Radix.

Specifications

· Accuracy : ± 2% RH, ± 0.5 °C

· 2 x 4-20 mA outputs

· Software calibration - no trim pots

· PC programmable

· 4.5-32 V DC loop supply

· True 2-wire operation

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai, India

Product Details:

SC805 is a high performance 2-wire Relative Humidity & Temperature (RH+T) Transmitter. Its relative humidity and temperature transmitter is available in surface mount, duct mount and remote sensor versions.Remote external sensors, SHT20, SHT30 (wall-mount) and SHT40 (duct-mount) may be placed as far as 25 meters from the unit. SC805 has a dual LCD display; the first line indicates relative humidity % and the second, the temperature in °C. The transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature. SC805 transmits two isolated 4-20 mA retransmission outputs to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). SC805’s microcontroller technology linearizes the input which makes control more effective. It is powered by a 4.5 - 32 V DC loop supply and has a loop drop of no more than 4.5V, which is remarkably low amongst such products. The RH+T transmitter is user programmable by a PC, connected via PCC82, a PC configurator by Radix.

Additional Information:

• Item Code: SC805

Product Details:

Relative Humidity and Temperature Transmitter SC807 is a high-performance 2wire Relative Humidity & Temperature (RH+T) Transmitter.

· Its relative humidity and temperature transmitter is available in duct mount, surface mount and remote sensor versions. Remote external sensors, SHT20, SHT30 (wall-mount) and SHT40 (duct-mount) may be placed as far as 25 meters from the unit.

· This transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature.

· SC807 transmits two isolated output signals to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR).

· Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. SC807’s micro controller technology linearizes the input which makes control more effective.

· It is powered by a 4.5 - 32 V DC loop supply and has a loop drop of no more than 4.5V, which is remarkably low amongst such products.

· The RH+T transmitter is user programmable by a PC, connected via PCC82, a PC configurator by Radix.

Specifications

· Accuracy : ± 2% RH, ± 0.5 °C

· 2 x 4-20 mA outputs

· Software calibration - no trim pots

· PC programmable

· 4.5-32 V DC loop supply

· True 2-wire operation

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai, India

Product Details:

RHT812 is a microcontroller based, high performance RH+T transducer. It can be factory configured for 2 x RH outputs, 2 x Temperature outputs, or 1 x RH + 1 x T output. Its high reliability industrial design offers some unique functions. The RH+T transducer is available in surface mount, duct mount and remote sensor versions. It is PC programmable using PC Configurator.
Specifications

• 2 x Analog outputs
• Accuracy : ± 2% RH, ± 0.5 °C
• Software calibration - no trimpots
• 18~36 V DC supply
• PC programmable
• Modbus protocol with RS485

Additional Information:

• Item Code: RHT812
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Mumbai, India