Radix Electrosystems Private Limited

Rabale, Mumbai, Maharashtra GST No. 27AAACR0436Q1Z4

Call 08048600052 73% Response Rate

Send Email

Timers

Choose from our three ranges of multifunction programmable digital timers; Memory, Non-Memory and Cyclic Timers, that automatically operate a time-based process, counting upwards or downwards. Memory timers have non-volatile memory that stores process information even when the instrument is powered down, or in case of a power outage. Cyclic timers can be programmed for periodical counting. Operators can easily set upto two set-points using membrane keys or push-wheels on the front panel of the timer. All Radix Timers are accurate to 0.01% of a quartz crystal. 

Digital Timer

Digital Timer

Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandRadix
Capacity10 milliseconds to 9999 hours
Control inputs4 fixed/configurable
Quartz crystal accuracy0.01% quartz crystal accuracy
Supply voltage 24 V DC OR 85 - 265 V AC
Product Code RCT606
RCT606 is a multifunction programmable timer with non-volatile memory to automatically operate a time-based process, counting upwards or downwards. It retains a memory of elapsed time until the next time it is switched on. RCT606 features a push wheel switch for frequent setpoint changes. The timer features a wide range of configurable control inputs. 

Additional Information:

  • Item Code: RCT606
Get Best QuoteRequest A Callback
Digital Timer

Digital Timer

Get Latest Price

Product Details:
UsageDigital Timer indicates, switches process when the stipulated set time is complete
Digit Display SizeDual Display
RCT604 is a multifunction programmable Digital timer with non-volatile memory to automatically operate a time-based process, counting upwards or downwards. It retains memory of elapsed time until the next time it is switched on. The Digital timer features a wide range of configurable control inputs. Start simply turns on the timer and there are 3 variations each for the Stop, Reset and Gate control input functions.
  • 9 user-selectable ranges
  • 10 milliseconds to 9999 hours
  • 4 user-selectable relay functions
  • Incrementing / decrementing display
  • 4 control inputs
  • Fixed/Configurable control inputs
  • ± 0.01% quartz crystal accuracy
  • Supply voltage: 24 V DC OR 85 - 265 V AC


Additional Information:

  • Item Code: RCT604
Get Best QuoteRequest A Callback
Digital Timer

Digital Timer

Get Latest Price

Product Details:
BrandRadix
ModelDigital Timer
ApplicationIndustrial, Laboratory
RCT606 is a multi function programmable Digital timer with non-volatile memory to automatically operate a time-based process, counting upwards or downwards. It retains memory of elapsed time until the next time it is switched on. RCT606 features a push wheel switch for frequent set point changes. The timer features a wide range of configurable control inputs. Start simply turns on the timer and there are 3 variations each for the Stop, Reset and Gate control input functions. The Stop function can stop the timer and maintain relay status, turn the relay on or turn it off. Similarly, Gate will freeze the timer in presence of an input and maintain relay status, turn the relay on or turn it off. Reset maintains the timer at its initial state as long as input is present, the timer will start counting up or down when the input is removed. In Pulse reset mode, it will reset and immediately restart the timer. In the third Reset variation, it will reset the timer and wait for a start pulse to begin counting again. A single LED displays the time counted up or down, 5 additional LEDs indicate hours, minutes, seconds, timer status and relay status. 1 set point can be programmed by the operator via a push wheel on the front of the unit. It is accurate to 0.01% of a quartz crystal. RCT606 features one relay with 4 relay functions: ON-DELAY, OFF-DELAY, CYCLIC-1 and CYCLIC-2.

Features
  • Non-volatile memory
  • 1 set point, on push wheel switches
  • User selectable:
  • 10 milliseconds to 9999 hours
  • Incrementing / decrementing display
  • 4 fixed/configurable control inputs
  • 0.01% quartz crystal accuracy
  • Supply voltage: 85 - 265 V AC OR 24 V DC


Additional Information:

  • Item Code: RCT301
Get Best QuoteRequest A Callback
Digital Timers

Digital Timers

Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandRadix
Supply voltage24 V DC OR 85 - 265 V AC
Product CodeRCT703
Capacity10 milliseconds to 9999 hours
Control inputs4 control inputs
Quartz crystal accuracy+/-0.01%
RCT703 is a multifunction programmable timer to automatically operate a time-based process, counting upwards or downwards. It has the volatile memory and will not store information without a power supply. RCT703 features a push wheel switch for frequent setpoint changes. The timer features a wide range of configurable control inputs. Start simply turns on the timer and there are 3 variations each for 

Additional Information:

  • Item Code: Rct703
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Autoclave RTD Sensors
Get Quote

Autoclave RTD Sensors

+ View all
RTD Sensors
Get Quote

RTD Sensors

+ View all
PID Temperature Controllers
Get Quote

PID Temperature Controllers

+ View all
Pressure Gauges
Get Quote

Pressure Gauges

+ View all
General Purpose RTD Sensors
Get Quote

General Purpose RTD Sensors

+ View all
Thermocouples
Get Quote

Thermocouples

+ View all
View Complete Range >
Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Radix Electrosystems Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.