Radix Electrosystems Private Limited
Radix Electrosystems Private Limited
Mahape, MIDC, Navi Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Dwyer Products

In our effort to provide customers with complete solutions, Radix is the channel partner for some leading brands and products that we trust. Supplementing our already-vast product range, we supply Dwyer''s complete range of products for pressure, air velocity, flow, level, temperature, humidity and air-quality control.
Integrating the products from these global instrumentation powerhouses, Radix is sure to meet virtually

Magnehelic Differential Pressure Gauges Series 2000-sp

Magnehelic Differential Pressure Gauges Series 2000-sp
  • Magnehelic Differential Pressure Gauges Series 2000-sp
Ask For Price
Bright red LED on right of scale shows when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC.Requires HP or MP style cover and bezel.
  • Service: Air and non-combustible, compatible gases. (Natural gas option available.)
  • Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test
  • Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00,-60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
  • Pressure Limits: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
  • Temperature Limits: 20 to 140°F. (-6.67 to 60°C)
  • Size: 4" (101.6 mm) diameter dial face
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations
  • Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
  • Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)
Request
Callback


Additional Information:

  • Item Code: Series2000SP
  • Minimum Order Quantity: 1 Piece(s)
Yes! I am Interested

Magnehelic Differential Pressure Gauges

Magnehelic Differential Pressure Gauges
  • Magnehelic Differential Pressure Gauges
Ask For Price
The Magnehelic® gauge is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Select the Magnehelic® gauge for high accuracy, guaranteed within 2% of full scale. Designed for air and non-corrosive gases, 81 models are available to suit any requirement. Using Dwyer's simple, frictionless Magnehelic® gauge movement, this range of products quickly indicates low air or non-corrosive gas pressures - positive, negative (vacuum) or differential.These gauges resist shock, vibration and over-pressures and contain no manometer fluid to evaporate, freeze or leveling or cause toxic problems. They are very budget friendly as well!
Request
Callback


Additional Information:

  • Item Code: Series2000
  • Minimum Order Quantity: 1 Piece(s)
Yes! I am Interested

Series CDTR Carbon Dioxide/RH/Temperature Transmitter Series

Series CDTR Carbon Dioxide/RH/Temperature Transmitter Series
  • Series CDTR Carbon Dioxide/RH/Temperature Transmitter Series
Ask For Price
Series CDTR Carbon Dioxide, Relative Humidity and Temperature Transmitters reduce the number of sensors mounted on a wall or in a duct. By combining RH, CO2 and temperature in one device, system integrators are able to lower installation time of mounting multiple housings, while lowering material cost at the same time.
  • Range:CO2: 0 to 2000 or 0 to 5000 ppm (depending on model); Relative Humidity: 0 to 100% ; Temperature: 32 to 122°F (0 to 50°C).
  • Accuracy:±40 ppm 3% of reading (CO2); ±2% (RH).
  • Temperature Dependence:±8 ppm/ °C at 1100 ppm.
  • Non-Linearity:16 ppm.
  • Pressure Dependence:0.13% of reading per mm of Hg.
  • Response Time:2 minutes for 99% step change.
  • Temperature Limits:32 to 122°F (0 to 50°C).
  • Humidity Limits:10 to 95% RH (non-condensing).
  • Power Requirements:16 to 35 VDC / 19 to 28 VAC.
  • Power Consumption:Average: 2 watts; Peak: 3.75 watts.
  • Sensor:Single-beam, dual-wavelength NDIR.
  • Output:Current: 4 to 20 mA (max 500 O); Voltage: 0 to 5 VDC or 0 to 10 VDC (min 500 ?); Relay: SPST NO 2A @ 30 VDC; RTD or thermistor per r-t curves (depending on model).
  • Weight:5.6 oz (158.8 g).
  • Agency Approvals:CE.
Request
Callback


Additional Information:

  • Item Code: SeriesCDTR
  • Minimum Order Quantity: 1 Piece(s)
Yes! I am Interested
X

Explore more products

Looking for “Dwyer Products”?


Reach Us
Puja Kushwaha (Manager)
A566, TTC Industrial Area, MIDC, Mahape
Mahape, MIDC, Navi Mumbai- 400710, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS